Known bugs Analysis 4.10
Last updated on February 24, 2022
Usability issues:
- Unsupported file formats (e.g. .pdf) can be selected during the first analysis
- Difficulties when selecting a single curve in an amplification graph
- Opening an analysis may return an error ("Cannot read property 'targetCalling' of undefined") due to failed loading of fluorescence values. Refreshing the page solves the issue
- Manual panel assignment with inactive assay gives an error. You can proceed without any issues
- Zoom level for QC images is limited to 200% whereas zooming in using the scroll wheel doesn’t have a limit
- Sample results table in Summary may disappear when sorting and expanding rows. Refreshing the page solves the issue.
- Rectangular zoom doesn’t correctly zoom in when using the scroll wheel
- The plate view short keys don’t always work (e.g. CTRL+A)
- When changing the Tm value outside the specified min and max values, the tooltip just shows 'min' and 'max instead of the full message "Tm must be within range of min to max."
- Other wells not greyed out when selecting a well without replicates
- The concentration is not updated when the standard curve validity is changed, unless the screen is refreshed
Known bugs Analysis 4.9
Last updated on December 15, 2022
Usability issues:
- Unsupported file formats (e.g. .pdf) can be selected during the first analysis
- Difficulties when selecting a single curve in an amplification graph
- Opening an analysis may return an error ("Cannot read property 'targetCalling' of undefined") due to failed loading of fluorescence values. Refreshing the page solves the issue
- Manual panel assignment with inactive assay gives an error. You can proceed without any issues
- Zoom level for QC images is limited to 200% whereas zooming in using the scroll wheel doesn’t have a limit
- Sample results table in Summary may disappear when sorting and expanding rows. Refreshing the page solves the issue.
- Rectangular zoom doesn’t correctly zoom in when using the scroll wheel
- The plate view short keys don’t always work (e.g. CTRL+A)
- When changing the Tm value outside the specified min and max values, the tooltip just shows 'min' and 'max instead of the full message "Tm must be within range of min to max."
- Other wells not greyed out when selecting a well without replicates
- The concentration is not updated when the standard curve validity is changed, unless the screen is refreshed
Known bugs Analysis 4.8
Last updated on February 8, 2023
Usability issues:
- Unsupported file formats (e.g. .pdf) can be selected during the first analysis
- Difficulties when selecting a single curve in an amplification graph
- Opening an analysis may return an error ("Cannot read property 'targetCalling' of undefined") due to failed loading of fluorescence values. Refreshing the page solves the issue
- Manual panel assignment with inactive assay gives an error. You can proceed without any issues
- Zoom level for QC images is limited to 200% whereas zooming in using the scroll wheel doesn’t have a limit
- Sample results table in Summary may disappear when sorting and expanding rows. Refreshing the page solves the issue.
- Rectangular zoom doesn’t correctly zoom in when using the scroll wheel
- When opening an analysis that is assigned to another user, the warning message is not fully visible
- The plate view short keys don’t always work (e.g. CTRL+A)
- After successfully marking a regular sample for retest and saving changes, the control results section wrongfully displays an 'unsaved changes' warning
Known bugs Analysis 4.7
Last updated on Dec 3, 2021
Usability issues:
- Unsupported file formats (e.g. .pdf) can be selected during the first analysis
- Difficulties when selecting a single curve in an amplification graph
- Opening an analysis may return an error ("Cannot read property 'targetCalling' of undefined") due to failed loading of fluorescence values. Refreshing the page solves the issue
- Manual panel assignment with inactive assay gives an error. You can proceed without any issues
- Zoom level for QC images is limited to 200% whereas zooming in using the scroll wheel doesn’t have a limit
- Sample results table in Summary may disappear when sorting and expanding rows. Refreshing the page solves the issue.
- AriaDx/Mx experiment files cannot be analyzed when there are non-zero values in a channel that has no dye
- Rectangular zoom doesn’t correctly zoom in when using the scroll wheel
- When opening an analysis that is assigned to another user, the warning message is not fully visible
- Passive Reference Dyes may be shown twice in the graph
Known bugs Analysis 4.6
Last updated on Oct 12, 2021
- Usability issues:
- Unsupported file formats (e.g. .pdf) can be selected during the first analysis
- Difficulties when selecting a single curve in an amplification graph
- Opening an analysis may return an error ("Cannot read property 'targetCalling' of undefined") due to failed loading of fluorescence values. Refreshing the page solves the issue
- Manual panel assignment with inactive assay gives an error. You can proceed without any issues
- Zoom level for QC images is limited to 200% whereas zooming in using the scroll wheel doesn’t have a limit
- Sample results table in Summary may disappear when sorting and expanding rows. Refreshing the page solves the issue.
- AriaDx/Mxexperiment files cannot be analyzed when there are non-zero values in a channel that has no dye
- Rectangular zoom doesn’t correctly zoom in when using the scroll wheel
- When opening an analysis that is assigned to another user, the warning message is not fully visible
Known bugs Analysis 4.5
Last updated on Jul 2, 2021
- Usability issues:
- Unsupported file formats (e.g. .pdf) can be selected during the first analysis
- Difficulties when selecting a single curve in an amplification graph
- Selection is not remembered in the plate and graph view after editing a result
- Opening an analysis may return an error ("Cannot read property 'targetCalling' of undefined") due to failed loading of fluorescence values. Refreshing the page solves the issue
- Manual panel assignment with inactive assay gives an error. You can proceed without any issues
- Zoom level for QC images is limited to 200% whereas zooming in using the scroll wheel doesn’t have a limit
- Sample results table in Summary may disappear when sorting and expanding rows. Refreshing the page solves the issue.
- Wells in multiplate analyses are not correctly selected when using the CTRL key
Known bugs Analysis 4.4
Last updated on Apr 30, 2021
- Usability issues:
- Resetting the scale of amplification graph settings does not take the x-axis into account
- Unsupported file formats (e.g. .pdf) can be selected during the first analysis
- Difficulties when selecting a single curve in an amplification graph
- Selection is not remembered in the plate and graph view after editing a result
- Opening an analysis may return an error ("Cannot read property 'targetCalling' of undefined") due to failed loading of fluorescence values. Refreshing the page solves the issue
- Manual panel assignment with inactive assay gives an error. You can proceed without any issues
- Zoom level for QC images is limited to 200% whereas zooming in using the scroll wheel doesn’t have a limit
-
Sample results table in Summary may disappear when sorting and expanding rows. Refreshing the page solves the issue
Known bugs Analysis 4.3
Last updated on Mar 26, 2021
- Usability issues:
- Resetting the scale of amplification graph settings does not take the x-axis into account
- Unsupported file formats (e.g. .pdf) can be selected during the first analysis
- Difficulties when selecting a single curve in an amplification graph
- Selection is not remembered in the plate and graph view after editing a result
- Opening an analysis may return an error ("Cannot read property 'targetCalling' of undefined") due to failed loading of fluorescence values. Refreshing the page solves the issue
- Manual panel assignment with inactive assay gives an error. You can proceed without any issues
- Zoom level for QC images is limited to 200% whereas zooming in using the scroll wheel doesn’t have a limit
Known bugs Analysis 4.2
-
Multiplate analyses with assignments in not all plates gives an error during PCR Setup
-
Analysis fails if dyes don’t match case, e.g. CY5 vs Cy5
- Plate setup is not automated for AriaMx/Dx with a passive reference dye
-
Usability issues:
-
Resetting the scale of amplification graph settings does not take the x-axis into account.
-
Unsupported file formats (e.g. .pdf) can be selected during the first analysis.
-
Difficulties when selecting a single curve in an amplification graph.
-
Selection is not remembered in the plate and graph view after editing a result.
-
Resetting graph zoom when using logarithmic scale fails.
-
Opening an analysis may return an error ("Cannot read property 'targetCalling' of undefined") due to failed loading of fluorescence values. Refreshing the page solves the issue.
-
Manual panel assignment with inactive assay gives an error. You can proceed without any issues.
-
Opening assay details in Results doesn’t show a scrollbar
Known bugs Analysis 4.1
-
Multiplate analyses with assignments in not all plates gives an error during PCR Setup
-
Usability issues:
-
Resetting the scale of amplification graph settings does not take the x-axis into account.
-
Unsupported file formats (e.g. .pdf) can be selected during the first analysis.
-
Difficulties when selecting a single curve in an amplification graph.
-
Selection is not remembered in the plate and graph view after editing a result.
-
Resetting graph zoom when using logarithmic scale fails.
-
Opening an analysis may return an error ("Cannot read property 'targetCalling' of undefined") due to failed loading of fluorescence values. Refreshing the page solves the issue.
-
Selecting wells in the results plate view via dragging does not work due to a scaled plate view.
-
'Go to assays’ link from Analysis to the Assays module does not work when working in an incognito window
-
Selection of curves and wells is cleared in multiplate analyses after switching plates
Known bugs Analysis 4.0
-
Reanalyzing an analysis while the Assay Plugin has been inactivated, results in a Failed analysis. Reactivate the relevant Assay plugin prior to reanalyzing or upload the file again so that the new Assay plugin will be chosen.
-
Usability issues:
-
Resetting the scale of amplification graph settings does not take the x-axis into account.
-
When changing a result, the audit trail mentions Positive and Negative instead of Detected and Not detected
-
Unsupported file formats (e.g. .pdf) can be selected during the first analysis
-
Difficulties when selecting a single curve in an amplification graph
-
Collapse/Expand all rows in the Summary tab may not always work
-
Selection is not remembered in the plate and graph view after editing a result
-
Deselecting wells in plate view does not deselect the corresponding curves
-
Resetting graph zoom when using logarithmic scale fails
-
Selecting wells in the results plate view via dragging does not work due to a scaled plate view
-
Opening an analysis may return an error ("Cannot read property 'x' of undefined") due to failed loading of fluorescence values. Refreshing the page solves the issue.
Comments
0 comments
Please sign in to leave a comment.